1-1-2. Front Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off three tapes (1) and disconnect the flexible cable (2).
3. Disconnect the flexible cable (3) and two connectors (4).
4. Remove the screw (5).
5. Remove two screws (6).
6. Release four claws, then remove the front panel (7).
1-1-3. Tray Door
1. Remove the front (R) PC board and front (L) PC board. (Refer to item 1-2-4.)
2. Remove the spring (1).
3. Remove the tray door (2) while slightly bending it.
Tapes (1)
Screw (5)
Connector (4)
Claw
Screws (6)
Claws
Front panel (7)
Tray door (2)
Flexible cable (2)
Flexible
cable (3)
Connector (4)
Claw
Fig. 2-1-2
Spring (1)
Fig. 2-1-3