1-1-2. Front Panel
(1) Remove the top cover. (Refer to item 1-1-1.)
(2) Disconnect the flexible cable (1).
(3) Disconnect the flexible cable (2) and two connectors (3).
(4) Remove two screws (4) and two ground wires (5) and (6).
(5) Remove the front panel (7).
1-1-3. Tray Door
(1) Remove the front panel. (Refer to item 1-1-2.)
(2) Remove the Front (R) PC board. (Refer to item 1-2-4 (2) to (4).)
(3) Remove the spring (1).
(4) Remove the tray door (2) while slightly bending it.
Ground wire (5)
Screw (4)
Ground wire (6)
Connector (3)
Claw
Claws
Tray door (2)
Screw (4)
Flexible cable (1)
Claw
Front panel (7)
Fig. 2-1-2
Fig. 2-1-3
Flexible cable (2)
Connector (3)
Spring (1)