Data Of Code - Sony VPL-FE110U Protocol Manual

4.

DATA OF CODE

1 Start Condition
Bn NAME
B0 Start Code
2 INDEX Header
/* RECEIVER INDEX
–
B1 PERIPHERAL INDEX
B2 GROUP INDEX UPPER BYTE
B3 GROUP INDEX LOWER BYTE
B4 DEVICE INDEX UPPER BYTE
B5 DEVICE INDEX LOWER BYTE
/* SENDER INDEX
–
PERIPHERAL INDEX
B6
GROUP INDEX UPPER BYTE
B7
B8 GROUP INDEX LOWER BYTE
B9 DEVICE INDEX UPPER BYTE
B10 DEVICE INDEX LOWER BYTE
/* Command
–
B11 CMD1
B12 CMD2
CMD3
B13
Note : CMD1 and CMD2 are assigned with different commands for each unit. Consequently,
there is no compatibility of commands between units. For details of the commands,
refer to the respective list of commands for the units.
3 Sub Data Size
B14 Data Length 1
Note : Error when 00,01 and 82 to FF hex codes are included.
4 Data Size
B15 Data Length 2
Note : Error when 11 to FF hex codes are included.
4
DATA NOTE
A5 Indicates the first packet
*/
–
00 – 03 01 : All, 01 : Projector, 02 : Switcher, 03 : Controller
00
Group Index = 0000 – 0063 hex (0000 hex : All)
00 – 63
00
Device Index = 0000 – 0063 hex (0000 hex : All)
00 – 63
*/
–
01 – 03 01 : Projector, 02 : Switcher, 03 : Controller
00
Group Index = 0001 – 0063 hex
01 – 63
00
Device Index = 0001 – 0063 hex
01 – 63
*/
–
Refer to attached
Refer to attached
Receiving Device
Peripheral INDEX = 01
00 Projector All
10 – 7F CRT Projector (10 CRT All)
80 – AF LCD Projector (80 LCD All)
B0 – FF DMD Projector(B0 DMD All)
02 – 81 (B16 + 2 hex) Data Size
(B15 *80 hex) Data Size
00 – 10
Receiving Device
Peripheral INDEX = 02
Switcher All
10 : PC-3000
VPL-FE110U/FE110M