Omega Montage Elite Massage User Manual page 15

Massage Chair Set Up & Preparation
Arm Cuff Installation(Montage Premier Only)
1.Insert the air tubes of the arm cuff through the hole of the middle of the armrest for both sides.
2.Open the armrest and secure the arm cuff with the four (4) screws provided.
3.Connect the air hoses to the air coupling located inside the armrest.
4.Close the top of the armrest and lift the armrest and secure the armrest together with the two(2)
screws behind the armrest guide.
Seat Cushion Installation
1. The seat cushion needs to be connected to the massage chair for both the air and vibration massages.
2. Connect the air coupling to the air hose with the same color or number (Connect 3 to 3 or yellow to yellow).
3. Connect the electrical couplings with its corresponding color or number. To separate, press the hooks together and pull the plug out.
4. Attach the seat cushion by lining up the Velcro strips.
Seat Cushion
Velcro Strip
t
Pull out
I
To Separate
Air Connection
o
Make sure to install the Arm Unit securely.
Otherwise, it would cause air leakage or in-
jury if the unit falls accidently.
1 Screw
Hook
Press down
To Separate
Electrical Coupling