Omega Montage Elite Massage User Manual page 14

Massage Chair Set Up & Preparation
Installation of the Remote Control Cradle
• The remote control cradle is installed on the left side of the massage chair base.
• Snap the cap to the end of the support bracket and secure the remote control support bracket with the 3 screws provided.
• Secure the remote control cradle to the top of the remote control support bracket with the screws provided.
• Installation of Remote Cradle: Insert the remote control from the top until it sits firmly in the holder.
• Removal of Remote Control: Hold the top of the remote control and slide it up and out of the holder.
• Adjustable Remote Cradle: Pivot remote cradle to the angle you desire or swivel it to the left or right in the desired position.
Screws
(3 PCS)
Swivel Adjustment