Inlet Valve Assembly - LG WD-12111(6)FDB / 12112(7)FDWD-14111FDB Service Manual

INLET VALVE ASSEMBLY

MAIN PWB ASSEMBLY
LOWER COVER
Disconnect the wiring connector.
Unscrew 2 screws from the back.
When reconnecting the connector
Cold only model
VALVE#1 (MAIN)
VALVE#2 (PRE)
Cold and Hot model
VALVE #1 (MAIN)
VALVE #2 (PRE)
VALVE #3 (HOT)
Remove the back cover.
Unscrew 3 screws.
Disassemble the FILTER ASSEMBLY.
Pull the MAIN PWB ASSEMBLY as shown.
Open the lower cover CAP by using coin and pull out
the lower cover in the arrow direction after a screw is
unscrewed.
27
Whited/Black-Black
Gray/ White - Black
Whited/Black-Black
Gray/ White - Black
Blue/Red - Black