Rockford Fosgate Punch P152-S Installation & Operation Manual page 7

Wiring
Standard - Integrated Concealed Crossover (ICC™)
NOTE: For the P152-S and P1652-S, the crossover is integrated into the
basket of the mid-bass driver. This component grade crossover allows
for easy connection of the full component system without the need for an
external crossover.
1. Use illustration for proper connection.
2. Be sure to maintain speaker polarity.
3. Connect primary tabs on Mid-Range/Woofer to Amplifier.
4. Connect secondary tabs on Mid-Range/Woofer to Tweeter.
Example of P1 component
standard wiring
IN – Connect from Amplifier
P1T-S Crossover
1. Use illustration for proper connection.
2. Be sure to maintain speaker polarity.
3. Connecting the positive wire to 0dB matches the amplitude of the
tweeter to the speaker.
4. Connecting the positive wire to -2dB or -4dB reduces the amplitude of
the tweeter -2dB or -4dB lower than the midrange, (ideal for tweeters
located high in door panels and midranges located low in the kick
panel).
Mid-Range Tweeter
Woofer
TWT – Connect to Tweeter
illus.-3.1
illus.-3.2
7