Hoover Shampoo- Polisher Owner's Manual page 8

To attach pads, insert end of
fastener through opening in pad.
Place pads over scrubbing-wax-
ing-polishing brushes only.
The fastener fits around the brush
shaft. Press fastener to snap pad
into place. Unsnap to remove
pad.
To carry
Use the tank handle to conven-
iently carry the shampoo-polisher
from room to room.
Storing
Wrap cord around cord storage
hook located at the bottom of
tank housing, and then around
trigger.
Store your shampoo-polisher in a
cleaning closet or convenient
place, ready for use. Hang it on
the wall or remove brushes and
store it with the handle in the up-
right position. Never store it on
the brushes or squeegee blades.