Table of Contents
Advertisement
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
* Procedure:
By using the main unit, while depressing the SOUND FIELD
button, press the power ?/1 button to turn on the main power.
The message "S. F. CLR" appears and initialization is performed.
SPECIAL DUPLEX KEY ON MODE
*This operation for making possible the key duplex pressing of
remote controller.
*Procedure
By using main unit, while depressing the PRESET TUNNING -
button, press the power ?/1 button to turn on the main
power.
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
When the set is SPECIAL DUPLEX KEY ON mode, by using
remote controller, press ENTER button three times, then press
the MAIN MENU button one time, and then press the A.F.D.
button one time.
The message "FACTORY" appears and switch off the set.
Press the power ?/1 button again, and the present contents are
reset to the default values.
ALL CLEAR MODE
* The all preset value is cleared when this mode is activated.
* Procedure :
When the set is SPECIAL DUPLEX KEY ON mode, by using
remote controller, press ENTER button three times, then press
the MAIN MENU button one time, and then press the b but-
ton one time. The message "CLEARED" appears and clear all
preset value.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns
on one after another.
* Procedure:
When the set is SPECIAL DUPLEX KEY ON mode, by using
remote controller, press ENTER button three times, then press
the MAIN MENU button one time, and then press the V but-
ton one time.
All segments turn on.
D D
D D
SP SP A SP B
DIGITAL EX
PRO LOGIC II DTS-ES NEO : 6 MPEG-2 AAC
OPT COAX MULTI CH IN 12
L
C
R
SW
L F E
SL
SSB
SR
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
When the set is SPECIAL DUPLEX KEY ON mode, by using
remote controller, press ENTER button three times, then press
the MAIN MENU button one time, and then press the B but-
ton one time. The model name, destination and the software ver-
sion are displayed.
SECTION 3
TEST MODE
MEMORY
D.RANGE
EQ
STEREO
MONO
RDS
SLEEP
dB
kHz
mft.
MHz
KEY CHECK MODE
* Button check
* Procedure:
When the set is SPECIAL DUPLEX KEY ON mode, by using
remote controller, press ENTER button three times, then press
the MAIN MENU button one time, and then press the v but-
ton one time.
"REST XX" appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed "REST 00" appears.
SWAP ALL MODE
* For test all channels working correctly with only L/R source
input.
* Procedure:
When the set is SPECIAL DUPLEX KEY ON mode, by using
remote controller, press ENTER button three times, then press
the MAIN MENU button one time, and then press the 2CH
button one time.
Set the SOUND FIELD to A.F.D AUTO.
"SWAP ALL" appear : L-CH input t Front L, Surround L,
center channel output.
R-CH input t Front R , Surround R , Sub Woofer channel output.
HISTORY MODE
* Display embedded information.
For check amplifier condition when protector happen, Input
source, Sound Field setting, Volume level, Tone setting and
Operation time .
* Procedure :
When the set is SPECIAL DUPLEX KEY ON mode, by using
remote controller, press ENTER button three times, then press
the MAIN MENU button one time, and then press the
VOLUME + button one time.
DSP TEST MODE
* DSP tests are performed.
* Procedure :
When the set is SPECIAL DUPLEX KEY ON mode, by using
the remote controller, press ENTER button three times, then
press the MAIN MENU button one time and then press the
MUTING button one time.
• Select the item by pressing Cursor button ( V or v ).
• Select the function by pressing Cursor button ( B or b ).
RELEASE THE TEST MODE
To release the test mode, turn off the main power.
STR-LV500
Ver 1.1
7
Advertisement
Table of Contents
