Deep Cleaner Description; Storing Hose & Tools - Hoover Plus Owner's Manual

Deep cleaner with automatic tool conversion
Hide thumbs Also See for Plus:
Table of Contents

Advertisement

1 - 1 0
Slide rack down into place. Insert screw
at (D) and tighten with a Phillips screw-
driver.
1 -1 3
Position tool in holder at base of cleaner
and snap it into place as shown at arrow.
2. How to use

Deep cleaner description

2-1
1
2
4
8
9
10
11
12
13
14
15
19
18
1 - 1 1
D
Storing hose & tools
Store hose on rack by first positioning
hose in front section of holder.
1 - 1 4
For Plus models
To store stair/upholstery nozzle, open
tool door, place nozzle in bracket and fit
it securely into position. To remove,
reverse this procedure.
6
7
4
5
3
16
17
21
6
The assembled deep cleaner will look like the drawing.
1. Hand grip
2. Solution trigger: press to
release clean solution.
3. Cord clip: place cord in clip
to keep it out of the way
when using cleaner
4. Hose
5. Hose holder: wrap hose
around holder and hooks (6)
for storage.
6. Hose hooks
7. Cord hooks: wrap cord
around hooks for storage.
The top hook can be rotated
right or left for quick and
easy cord release
8. Stair/upholstery nozzle
9. Carrying handle
10. Clean solution tank handle
11. Clean solution tank cap/
7
measuring cup
12. Clean solution tank: holds
22
cleaning solution.
13. Recovery tank handle:
raise handle to unlock tank
for removal; lower handle for
ward to lock tank into posi-
20
tion.
1 - 1 2
F
F
E
Continue wrapping hose under lower
hook (E). Snap hose end fully into hold-
er (F).
The hose end must be pushed com-
pletely down into holder (F) to ensure
maximum suction when cleaning
floors.
1 - 1 5
How to reattach tool
cover
The tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
slots on sides of tool storage area.
Push cover down to secure in place.
14. Recovery tank: holds dirty
solution.
15. Hood
16. Brush speed selector:
slide selector to set brush
speed on HI, LO, or OFF.
17. Brush Indicator: spins
when brushes are rotating.
18. Nozzle.
19. Cleaning mode indicator:
choose either floor or tools
20. ON/OFF pedal
21. Handle release pedal: step
on pedal to lower handle to
operating (floor) position;
22. Stair/upholstery nozzle OR
Utility nozzle
*
*
*Included with some models
This deep cleaner is intended
for household use. Operate
deep cleaner only at voltage
specified on data plate on back
of cleaner. Plug deep cleaner
Into a properly grounded
outlet.
Continued
5

Advertisement

Table of Contents
loading

Table of Contents