Paper Feed Jam; Paper Exit Jam - Oki OKIPAGE 8iM Maintenance Manual

[JAM error]
2-2

Paper feed jam

• Does a paper feed jam occur when the power supply is turned on?
• Yes
• Yes Remove the jammed paper.
• No
• No Replace paper sensor (outlet or paper).
• Yes
• No Has the paper arrived at paper sensor (paper)?
• No
• No Check the gear block.
• Yes
• No Set the I/D unit correctly.
• Yes
• Yes Has the paper arrived at the paper sensor (outlet)?
• Yes
• No Replace the paper sensor (outlet).
• Yes
• No Check the gear block.
2-3

Paper exit jam

• Does a paper exit jam occur when the power supply is turned on?
• Yes
• Yes Remove the jammed paper.
• No
• No Replace the paper sensor (outlet).
• Yes
• No Check the gear block or replace the eject roller.
41260201TH Draft
Is the jammed paper on paper sensor (paper/outlet)?
Is paper sensor (outlet/paper) operating normally?
Replace the high-voltage power supply board(P2H).
Is the feed roller rotating?
Is the I/D unit set correctly?
Check the gear block.
Is the paper sensor (outlet) operating normally?
Replace the high-voltage power supply board(P2H).
Is the jammed paper on the paper sensor (outlet)?
Is the paper sensor (outlet) operating normally?
Replace the high-voltage power supply board(P2H).
71 / 106