Kyocera Mita KM-1810 Service Manual page 57

2A1/2
Maintenance
item No.
U074 Adjusting the DF input light luminosity
Description
Adjusts the luminosity of the exposure lamp for scanning originals from the DF.
Purpose
Used if the exposure amount differs significantly between when scanning an original on the contact glass and
when scanning an original from the DF.
Method
Press the start key.
Setting
1. Change the setting using the zoom +/– keys.
Description
DF input light luminosity
Increasing the setting makes the luminosity higher, and decreasing it makes the luminosity lower.
2. Press the start key. The value is set.
Test copy mode
While this maintenance item is being performed, copying from an original can be made in test copy mode.
Completion
Press the stop/reset key. The indication for selecting a maintenance item No. appears.
1-4-14
Description
Setting range
0 to 8
Initial setting
0