Temperature And Humidity Window - Honeywell TE923W User Manual

FULL
- - - -

Temperature and Humidity Window

The weather station supports up to 5 remote thermo hygrometers, corresponding to a separate
channel of the temperature and relative humidity display. The temperature can be displayed in
Celsius (ºC) or Fahrenheit (ºF).
The main unit carries the temperature and humidity sensor and uses this indoors data to calculate
an indoors comfort level - Wet, Comfort or Dry.
The main unit can be programmed to alarm if the temperature exceeds or falls below the pre-set
upper and lower limits on all remote channels. The limits are the same for all remote channels
Thermo-Hygrometer remote battery status is monitored on the main unit.
Note: The temperature alarms have a 0.5 ºC deviation to prevent them from sounding due to small
temperature fluctuations that are close to the set alarm value. This means that after the temperature
reaches the alarm temperature, it will have to fall below the alarm temperature plus the deviation of
(0.5°C) to activate the alarm.
Comfort Level Indication
The main unit is capable of detecting and displaying the current indoor comfort levels of
surrounding environment. The comfort level based on the combination of the current indoor
temperature and humidity readings. The following comfort levels may be displayed: COMFORT
(comfortable); WET (wet) and DRY (dry).
Indicator
displayed
COMFORT
WET
DRY
Sunrise for the FULL
previous day
No sunrise for the
whole day
Temperature Humidity
Range Range
20°C to 25°C 40%RH-
(68°F to 77°F) 70%RH
-5°C to 50°C OVER
(23°F to122°F) 70%RH
5°C to 50°C BELOW
(23°F to122°F) 40%RH
35
Sunset on the
following day or
later
- - - - No sunset for the
whole day
Shows current condition
Ideal for both relative
humidity and temperature
Contains excess moisture
Contains inadequate
moisture