Related Manuals for Honeywell TE821
Summary of Contents for Honeywell TE821
- Page 1 Professional Weather Center with PC Interface ( TE821) USER'S MANUAL TE821 IM (S&P) E.indd 13/11/06, 2:51 PM...
- Page 2 Features Weather Forecast Congratulations on your purchase of the TE821 Weather Station. The weather station consists of - Sunny, Partly Cloudy, Cloudy, Slight Rain, Heavy Rain, Snow and Unstable Weather conditions a main console unit with remote sensors which collect and transmit a wide range of weather data, including outdoor temperature, humidity, wind speed and direction.
-
Page 3: Contents Of Complete Weather Station Kit
The “SET” will toggle the direction between two mode: 1. Let the wind direction as manufacturer design. It will be as a default setting after 2. Set the current direction as NORTH. TE821 IM (S&P) E.indd 116-117 13/11/06, 2:51 PM... -
Page 4: Using Your Weather Station
- The official mounting location for anemometers is 10m (33 ft) above ground level in a clear - Press and hold to enable cycling display of channel tempera unobstructed location. ture and humidity LIGHT/SNOOZE - Turns on backlight for 5s - Enters Snooze mode when alarm is activated TE821 IM (S&P) E.indd 118-119 13/11/06, 2:51 PM... - Page 5 Sea Level Pressure/ Pressure and Moon Altitude Sensor Battery Status Phase Comfort Level Cycling Display Indoor Humidity Trend Tempature and Humidity Mode Icon Indoor Temp. Indoor Indoor Humidity Trend Temp. Min-Max Display Dew-point Tempature TE821 IM (S&P) E.indd 120-121 13/11/06, 2:51 PM...
-
Page 6: Customizing Your Weather Station
- Sea level pressure - Local pressure Note: Console unit must be powered with AC/DC adaptor for automatic control function. - Local altitude TE821 IM (S&P) E.indd 122-123 13/11/06, 2:51 PM... - Page 7 Press and hold either button for fast advance. The corresponding moon phase will be shown. 4. To exit, press MEMORY. Otherwise, if no buttons are pressed for 5s the display automatically returns to Pressure and Weather Forecast Mode. TE821 IM (S&P) E.indd 124-125 13/11/06, 2:51 PM...
- Page 8 8. Upon completion the display will return to normal Clock and Alarm Mode. Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Mode. All settings made will be discarded. TE821 IM (S&P) E.indd 126-127 13/11/06, 2:51 PM...
- Page 9 Should you wish to input your own location data or if a suitable city code could not be found, choose “USR” as the city code during setup. A searching function is also available, which allows the sunrise/sunset times for different dates to be viewed. TE821 IM (S&P) E.indd 128-129 13/11/06, 2:51 PM...
- Page 10 In Temperature and Humidity Mode, press and hold SET to convert units between degrees Celsius Corresponding remote sensor successfully linked ºC and degrees Fahrenheit ºF. No signals received for more than 15 minutes TE821 IM (S&P) E.indd 130-131 13/11/06, 2:51 PM...
- Page 11 - Gust speed (“GUST” is displayed) - Daily maximum gust speed (“GUST DAILY MAX” is displayed) Resetting the Wind Statistics Memory In Wind Mode, press and hold MEMORY to reset all wind statistics. TE821 IM (S&P) E.indd 132-133 13/11/06, 2:51 PM...
-
Page 12: Maintenance
5. Only use fresh batteries as specified in the user's manual. Do not mix new and old batteries as the old ones may leak. 6. Always read the user's manual thoroughly before operating the unit. TE821 IM (S&P) E.indd 134-135 13/11/06, 2:51 PM... -
Page 13: City Codes
: 315g (without battery) Dimension Main unit : 220(L) x 165(H) x 32(D) mm Remote Thermo.-Hygro unit : 55.5(L) x 101(H) x 24(D) mm Remote Anemometer unit : 405(L) x 375(H) x 160(D) mm TE821 IM (S&P) E.indd 136-137 13/11/06, 2:51 PM... - Page 14 ST = Tasmania DST SU = Standard American DST. SZ = New Zealand DST NO DST = no = Places that do not observe DST ON = Always add 1 hour with local standard time TE821 IM (S&P) E.indd 138-139 13/11/06, 2:51 PM...
-
Page 15: Technical Specifications
1h/24h/yesterday Rainfall Range 0.0 to 1999.9 mm ( 78.73 inch ) Last week/ last month Rainfall Range 0 to 19999 mm ( 787.3 inch ) Temperature Sensing Cycle (indoor) Humidity Sensing Cycle (indoor) RoHS TE821 IM (S&P) E.indd 140-141 13/11/06, 2:51 PM...