Central Pneumatic 68027 User Manual page 9

User-Maintenance Instructions
Procedures not specifically explained
in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION, BEFORE ANY MAINTENANCE OR
REPAIRS ARE DONE:
• Wear ANSI-approved safety goggles
with side shields. Other people in the
work area must also wear ANSI-approved
impact safety goggles with side shields.
• Release the pressure on the Nail Guide.
• Detach the air supply.
• Attempt to fire the Tool against a piece of scrap
wood to ensure that it is disconnected.
• Remove any object from the
Nail Guide before service.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise, vibration, or leaking air is detected,
have the problem corrected before further use.
SKU 68027 For technical questions, please call 1-800-444-3353.
TO PREVENT EXPLOSION: Lubricate only
with specified lubricants. Lubricate the air
inlet using only pneumatic tool oil.
Lubricate the internal mechanism using
only white lithium grease. Other lubricants may
damage the mechanism and may be highly
flammable, causing an explosion.
Note: These procedures are in addition to the
regular checks and maintenance explained as part
of the regular operation of the air-operated tool.
Daily - Air Supply Maintenance:
Every day, perform maintenance on the air supply
according to the component manufacturers'
instructions. The lubricator's oil level needs to be
maintained and the moisture filter must be regularly
drained. Performing routine maintenance on
the air supply will allow the tool to operate more
safely and will also reduce wear on the tool.
Page 9