Weather Forecast; Pressure History Chart - Honeywell TE653ELW User Manual

Honeywell barometric weather forecaster user manual

Hide thumbs Also See for TE653ELW:

User manual (12 pages)

Table of Contents

Enlarged version

SEA LEVEL barometric pressure option should be selected. In this case, the

SEA LEVEL barometric pressure value can be adjusted according to the local

metro area weather information. (Sources – local TV or radio station, etc).

NOTE: Locate your altitude with a portable GPS receiver or topographical

map .Locate barometric pressure at: http://weather.noaa.gov/weather/ccus.html

or, alternatively, from local radio or TV weather channels.

Once the main unit is powered, the display will show all available LCD

segments for a moment

IMPORTANT: All of the display functions will be locked, allowing setting

pressure parameters and your local altitude. The locked display will show the

abbreviation "hPa/mBar" flashing in the Pressure Mode, indoor temperature

and humidity readings in Temperature/Humidity Mode, default time in Clock

Mode and a default date in the Alarm/Calendar Mode.

If the pressure and altitude are not configured during this time, the unit will

self-calibrate in a few minutes and show the default settings for the pressure

and altitude (sea level) and the remote sensor reading.

NOTE: This is the only time when you can enter/adjust your local altitude

units and value.

To set the pressure & altitude units and program your altitude, use the main unit

buttons located on the back:

• Press UP or DOWN button on the back of the unit selecting the

pressure in inHg or hPa/mBar

• Press UNIT button to confirm and move to the altitude unit selection

mode

• Press UP or DOWN button selecting the altitude unit in feet or meters.

• Press UNIT button to confirm and move to the altitude value

programming mode.

• Press UP or DOWN to adjust an altitude value. Press and hold either

button for the advanced setting.

• Press PRESSURE/ALTITUDE button to confirm the programmed

altitude.

Unit will show dashes "- - - "instead of local barometric pressure for a moment

and then will self-adjust to the new altitude