Clock Alarms; Snooze - Honeywell TE653ELW User Manual

next parameter (month)
• Continue setting month, date, hour, minutes, language for the day of
the week and temperature in Fahrenheit or Celsius
• Press MODE for the last time to return to the time of day with seconds,
after the last parameter is set

CLOCK ALARMS

The Barometric Weather Forecaster has two time alarms – Weekday alarm (W)
and Single day alarm(S) - and one Ice Warning Alarm (PRE-AL).
• If Weekday (W) alarm is activated, it will sound at the set time and the
alarm icon will flash Mondays through Fridays
• If Single (S) day alarm is activated, it will sound at the set time and the
alarm icon will flash only for this specific day and will not activate on
subsequent days
• If Ice Warning Alarm ( PRE-AL) is activated, in will sound at the set
time and alarm icon will flash once the remote temperature for Channel
One (1) will reach 32°F(0°C) and below
NOTE: Ice Warning Alarm can be set only if one or both - Weekday or
Single alarm - are programmed.
SETTING THE WEEKDAY (W) AND SINGLE DAY (S) ALARMS
• Press ALARM button once to enter into the alarms setting mode. The
default alarm is a Weekday alarm (W). The abbreviation "OFF" with a
letter "W" next to it will be displayed, if the alarm has not been set
previously
• Press and hold ALARM button for two seconds. The hour digit will
flash
• Adjust the hour using UP ( ▲) or DOWN ( ▼) buttons
23
• Press ALARM button again. The minute digits will flash
• Adjust the minutes using UP (▲) or DOWN (▼) buttons
• Press ALARM button again to confirm and the weekday alarm time will
be set
• Set Single (S) day alarm if desired in the same manner
SETTING THE ICE WARNING ALARM (PRE-AL)
If Weekday (W) or Single day (S) alarm is set, the Ice Warning Alarm (Pre-AL)
can be programmed.
• Press ALARM button once to enter into the Ice Warning Alarm setting
mode. The abbreviation OFF with a PRE-AL next to it will be displayed.
• Press and hold ALARM button for two seconds. The number 30 will
flash, meaning that if selected, the alarm will sound 30 minutes earlier
than the Weekday or Single alarm.
• Select the desired Ice Warning Alarm interval in 15 minutes increments
between 15 and 90 minutes, using UP (▲) or DOWN (▼)buttons
• Press ALARM button to confirm and exit from the alarm setting mode.
ACTIVATING THE ALARM
• Press ALARM button to enter into the desired alarm mode.
• Press UP ( ▲) to activate or DOWN ( ▼) to deactivate desired alarm.
When alarms are activated, the corresponding icons W, S or PRE-AL
will be displayed.

SNOOZE

When the time alarm sounds, press the SNOOZE/LIGHT button to temporarily
stop it. After the SNOOZE/LIGHT is depressed, the time alarm sound will
resume in four minutes.
23
24