Clock Window - Honeywell TE852W User Manual

Note: The weather forecast accuracy is approximately 70%.
Display shows forecasted, not current conditions. The SUNNY icon
indicates clear weather, even when displayed during the night-time.
UNDERSTANDING MOON PHASE ICONS

CLOCK WINDOW

The main unit can be manually set to display the time, calendar or UTC time.
There are three time alarms available on the main unit: Weekday alarm (W),
Single alarm (S) and Ice Warning Alarm (Pre-Al).
• If Weekday alarm is activated, it will sound at the set time and the
alarm icon will flash Mondays through Fridays.
• If Single day alarm is activated, it will sound at the set time and the
alarm icon will flash only for this specific day and will not activate on
subsequent days.
• The Ice Warning Alarm is activated at programmed time interval (from
15 to 90 minutes) before the weekday or single alarm, if channel 1
temperature falling to freezing and below.
Note: Ice Warning Alarm can be set only if one or both - Weekday or
Single alarm are programmed.
Stormy
Snowy
23
The snooze duration for listed alarms can also be programmed up to 15
minutes.
ACCESSING CLOCK WINDOW
Press UP or DOWN until the clock icon
flash.
PROGRAMMING YOUR LOCATION
IMPORTANT: There are two options available for programming a location – an
auto and manual.
In case of an auto programming, select the closest city code from the codes
list programmed in the unit, then all necessary location data (longitude, latitude,
time zone and daylight savings time adjustment) will be set automatically.
In case of the manual programming, select the code USR (user) from the city
codes list, then you would need to enter all location data (longitude, latitude,
time zone and daylight savings time adjustment) manually.
AUTO-PROGRAMMING
• In the Clock Window, press and hold SET button until the day of week
language abbreviation "ENG" will flash
• Press the UP or DOWN selecting the day of the week in English,
German, French, Italian, Spanish or Dutch
• Press SET to confirm selection
• Select the city code closest your area by pressing UP or DOWN. Refer
to P. for a list of available codes
• Press SET to confirm the selection and enter to the year, calendar and
time setting mode
• Press the UP or DOWN selecting the current year, date, month, time
23
next to the time/date display will
24