Performing The Initial Startup - Getac PS336 User Manual

CAUTION: For optimal performance of the lithium battery, take note of the
following:
Use the included AC adapter only.

There is no need to fully discharge the battery before charging. You can

charge the battery before it is discharged.
Do not charge the battery where the temperature is high (e.g. in direct

sunlight).
As a protection against damage, your device stops charging when the

battery's temperature is extremely high or low. In high temperature
conditions, the charging stops when the battery's temperature gets
above 70°C (158°F) and continues when the temperature lowers to 60°C
(140°F). In low temperature conditions, the charging stops when the
temperature gets below -5°C (23°F) and continues when the
temperature rises to 0°C (32°F).
If you will not use the product for a long period of time, be sure to fully

charge the battery at least once every two weeks. Over discharge of the
battery can affect the charging performance.

Performing the Initial Startup

When turning on your device for the very first time, you will be guided
through a setup process.
1. Make sure that your device is either connected to AC power or the
battery has power.
2. Press the power button (
3. The setup screen appears. Follow the on-screen instructions to complete
the setup wizard.
4. After the setup is completed, the Home screen appears. You can now use
your device.
1-12
Getting Started
) to turn on your device.