Onkyo HT-R520 Service Manual page 11

REMOTE CONTROLLERS-2
RC-567M/569M/570M
1 STANDBY button
This button is used to set the unit to Standby.
2 ON button
This button is used to turn on the unit.
3 Input selector buttons
These buttons are used to select the input sources.
4 MULTI CH button
This button is used to select the multichannel DVD input.
5 TONE, [-] & [+] buttons
These buttons are used to adjust the bass and treble.
6 DIMMER button
This button is used to adjust the display brightness.
7 Arrow [ ]/[ ]/[ ]/[ ] & ENTER button
This button is used to select and adjust settings.
8 CH +/- button
This button is used to select radio presets.
9
RETURN button
This button is used to return to the previous screen
when changing settings.
10 DISPLAY button
This button is used to display various information
about the currently selected input source.
11 SP A & SP B buttons
These buttons are used to turn on and off speaker sets A and B.
12
Listening mode buttons
SURR button
This button is used to select the Dolby and DTS listening modes.
ALL ST button
This button is used to select the All Ch Stereo listening mode.
STEREO button
This button is used to select the Stereo listening mode.
PURE A button (not American model)
This button is used to select the Pure Audio listening
mode. In this mode, the display and internal video circuitry
are turned off, minimizing the possibility of interference,
for a high fidelity sound that's true to the original.
(No video signals are output in this mode.)
DIRECT button
This button is used to select the Direct listening mode.
[ DSP] & [DSP ] buttons
These buttons are used to select the Onkyo original
DSP (digital signal processor) listening modes.
13 TEST TONE, CH SEL, LEVEL- & LEVEL+
buttons
These buttons are used to adjust the level of each
speaker individually.
14 L NIGHT button
This button is used to set the Late Night function.
15 REMOTE MODE buttons
These buttons are used to select the remote controller
modes. When you use the remote controller, the
mode button for the currently selected mode lights up.
16 SLEEP button
This button is used to set the Sleep function.
17 VOL button
This button is used to set the volume of the unit.
18 SETUP button
This button is used to access various settings.
19 MUTING button
This button is used to mute the unit.
20 CINE FLTR button
This button is used to set the CinemaFILTER function.
TX-SR502/E/8250/HT-R520