Oregon Scientific WS901 User Manual page 3

MASSAGER
To activate / deactivate massager
Press down on top of the massager to activate
Release to deactivate
CHANGING MASSAGER HEADS
1. Hold the grey part to turn the massager head counterclockwise and remove
2. Insert massager head
3. Hold the grey part and turn the massager head clockwise to secure in place
SPECIFICATIONS
MAIN UNIT
TYPE DESCRIPTION
H x W x D 146.2 x 90.8 x 90.8 mm
(5.76 x 3.57 x 3.57 in)
Weight 320 g (11.29 oz)
without battery
Power 3xAAA for massager (not included)
1xCR2032 for clock (included)
PRECAUTIONS
Do not subject the unit to excessive force, shock, dust, temperature or humidity.
Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive materials.
Do not tamper with the unit's internal components. This invalidates the warranty.
Only use fresh batteries. Do not mix new and old batteries.
Images shown in this manual may differ from the actual display.
When disposing of this product, ensure it is collected separately for special treatment.
The contents of this manual may not be reproduced without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you're in the US and would like to
contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support
OR
Call 1-800-853-8883.
For international inquiries, please visit: www2.oregonscientific.com/about/international
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Mini Massager (model: WS901) is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via
our Oregon Scientific Customer Service.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired
operation.
WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our
website at www.oregonscientific.com), or on the warranty card for this product) for all inquiries instead.
We
Name: Oregon Scientific, Inc.
th
Address: 19861 SW 95 Ave.,Tualatin,
Oregon 97062 USA
Telephone No.: 1-800-853-8883
declare that the product
Product No.: WS901
Product Name: Mini Massager
Manufacturer: iPM Concepts Limited
Address: Block C, 9/F, Kaiser Estate,
Phase 1, 41 Man Yue St., Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause
harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.