Installing Cassette Compartment; Installing Servo Pcb - Panasonic RX-DT30 Service Manual

n

INSTALLING CASSETTE COMPARTMENT

Install the cass. open spring as shown in above diagram.
Release the spring
INSTALLING SERVO P.C.B.
Before installing the servo P.C.B., move the optical pickup
toward the outer edge from the mark "A".
(Otherwise, the rest switch (S701) mounted on the servo
P.C.B may be damaged.)
2. Connect the flexible cable to the connector (CN701).
3. Install the servo P.C.B. in the traverse deck ass'y with
( 0 - @I ).
the 3 screws
4. Solder the 2 terminals of the traverse motor and the
2 terminals of the spindle motor.
:
Note Connect the flexible cable to the connector (CN701)
firmly.
Tighten the screws before soldering the terminals.
I
J /J-Cass. Open Spring
,
__
-9-
Cassette Compartment
2. Fix the cassette compartment to front cabinet
Spindle motor
RX-DT30