nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
17.) Remove the MMC Port Cover.
19.) Unlock the clips of the Retainer Plate.
21.) Remove the Joystick Hat.
23.) Unscrew 4 screws in the shown order.
assembly use the red marked order and a torque of 18
Ncm.
Service Manual n90 Level 1&2
PAGE 14 (29)
CONFIDENTIAL
18.) Lift up the Side Key Assy. Mind the Flex foil.
20.) Separate the Retainer plate from the Side Key
Bezel Assy.
22.) One screw is located under a flex connector.
Carefully open the flex connector with the SRT-6.
24.) Lever up the BB Shield Assy at the guidance as
For
shown.
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
29.6.2005