Panasonic WR-DA7 Service Manual page 17

Function Area
The [function] area of a window contains the various
controls, buttons, settings, and values for the current
window.
Window Selection Buttons Area
This area of a window contains the buttons for the windows
that comprise the current window group. The button for the
current window will be highlighted.
L/R Meter Display
L/R Meter Display
This meter reflects the current MASTER L/R (left/right)
output of the DA7 , unless SOLO has been activated for a
channel. If a SOLO LED button is selected on the mixer, the
meter reflects the level of the solo'd channel(s) only.
In the [METER>SLOT] window, the [RESPONSE] area lets
you select between [VU] (Volume Units) and [PPM] (Pulse
Position Modulation). When [VU] is selected, the L/R Meter
Display will show the mixer output in Volume Units, and
when [PPM] is selected, the Meter reflects the mixer output
as Pulse Position Modulation.
SOLO LED Status Indicator
SOLO
SOLO LED Status Indicator
Located below the L/R meter display, the SOLO LED status
indicator will light and flash (red) when SOLO has been
activated for any channel on the mixer.
MEMORY Numeric Readout
MEMORY
MEMORY Numeric Readout
SOLO LED status indicator
The two-digit numeric readout displays the most recently
accessed SCENE MEMORY. Whenever an AUX monitoring
selection button is activated for either MONITOR A or
MONITOR B, the numeric display will momentarily display
the AUX selections.
CONSOLE LOCK LED Status Indicator
CONSOLE LOCK LED Status Indicator
When illuminated (red) , the password protection for an area
or function of the mixer is engaged, and selected mixer
operations cannot be performed.
See Section 16-3, [UTILITY>CONFIG] Window for more
information.
CONTRAST Control Knob
CONTRAST Control Knob
This knob controls the contrast value of the LCD screen.
Rotate the knob to adjust the contrast value of the LCD
screen for optimum viewing and to suit the operating
environment.
MULTI-CH VIEW LED Button
MULTI-CH VIEW LED Button
Press this LED button to activate the multi-channel viewing
mode for the LCD screen. When on (red), the LCD screen
will display the currently selected Channel Fader and one of
other sources that can be used to compare or copy
information from the current selection.
See Chapter 5, Channel, Library, and Meter Windows in
the Users' Guide for more information.
10
CONSOLE
LOCK
CONTRAST
MULTI-
CH VIEW