Table of Contents
Advertisement
Composing Your Own Ring Signal
The Phone's Note System
Your phone has the capability of handling a range of tones spreading
over two octaves. See the table below to understand the relationship
between the notes and the numeric keys on the telephone.
How to Enter a Simple Melody
The simple melody is Do-Re-Mi. This song corresponds to the C, D and
E notes on a music scale.
Select EditMelody from the
Clear the display by pressing CLR.
Press 1. The display will now show a c.
Press 2. The display will now show c and d.
Press 3. The display should now look like this.
Press YES to test the melody.
The phone plays the melody and asks you if you want to save it.
Press YES to save the melody as an alternative in the Ring type
function in the
menu.
SETTINGS
EN/LZT 126 1452 R2A
menu.
SETTINGS
Press this:
To:
Insert notes. To get a short note press the key for a
1–9
short time. To get a long tone, hold down the key.
Increase or decrease the pitch of the note to the left
#
of the cursor in half tone steps. Press once for sharp,
twice for flat and three times for normal pitch.
*
Insert a short pause.
Scroll within the melody. Press and hold down to go
The arrows
the beginning or end of the melody.
Get a higher or a lower octave for the note you have
0
inserted. A + in front of the note indicates a higher
octave.
Erase the note to the left of the cursor. Press and hold
CLR
down to erase the whole melody.
D
C
F
G
B
C+
p
E
A
D+
43
Advertisement
Table of Contents
