Specifications - Coleman PMP3000 Owner's Manual

Troubleshooting
PROBLEM: TV Interference
Reason
Electrical interference from
the inverter.
PROBLEM: Low Battery Alarm On All The Time
Reason
Input voltage below 10.5 ± 0.5 volts.
Poor or weak
battery condition.
Inadequate power being
delivered to the inverter
or excessive voltage drop.
PROBLEM: TV Does Not Work
Reason
TV does not turn on.
PMP3000 Models
Modelos PMP3000
Solution
Add an AC interference filter on
to the TV power cord. Refer
to TV and audio section of
this manual.
Solution
Keep input voltage above 10.5±0.5
volts to maintain regulation.
Recharge or
replace battery.
Make sure connection is secure.
Use lower gauge wire. Keep
wire length as short as possible.
Solution
Try turning the inverter
ON/OFF/ON.
Contact TV manufacturer for
start up surge and power
consumption.
A larger inverter may
be required.
9

Specifications:

Maximum Continuous Power
Surge Capacity (Peak Power)
Max Power Efficiency
Waveform
No Load Current Draw
Input Voltage Range
AC Receptacles
Fuse
Weight
Dimensions
Questions?
If you have any questions about this product, please contact our Customer
Service Department at (888) 231-4022, Monday through Friday, 9 AM to 5 PM
EST, or visit our website at www.teamproducts.com.
Owner's Manual
Manual del Usuario
3000 Watts
6000 Watts
>80%
Modified Sine Wave
<3.5A
11-15VDC
120V AC, Grounded
15 x 30 amp (spade type)
18.5 lbs.
19.9" (L) x 9.055"(W) x 6.14" (H)
505mm(L) x 230mm(W) x 156mm(H)
10