Table of Contents
Advertisement
m
)
2
e
CAUTION
After levelling
the door height
Next
1_MFL67795101_Eng.indd 10
Door Height adjustment
Model: GSL54*****, GSP54*****, GWL31****, GWP31****
- Method 1 is recommended.
- Use
spanner for freezer.
1
Height difference
Method 2 (only for Plumbing type)
1. Using large side of spanner, rotate release-preventive nuts (
release rotate release-preventive nuts' tightness.
2. Rotate the Adjust-hinge pin either (
using a narrow side of a spanner to adjust the level difference between the
refrigerator door and freezer door.
3. After adjusting door height, please firmly tighten the Release-prevention nuts
(
) counter-clockwise to the end.
Nut Releasing
Do not adjust the height level too much. The hinge pin can be fallen out.
•
(Range of height adjustment : Max. 3mm)
The refrigerator doors will close smoothly by adjusting the front side using the height
adjustment screw. If the doors do not close correctly, performance may be affected.
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
10
Method 1 (recommended)
Open the door and adjust the level by using a nut of height
adjusting screw on the lower side of a door with a spanner.
Raising
Raising
Door Up
Door Up
Release
Preventing Nut
Adjust Hinge Pin
Lower Door
Spanner
Down
) clockwise or (
Release
Preventing Nut
Raising
Adjust Hinge Pin
Door Up
Lower Door
Down
Installation
) clockwise to
) counter-clockwise
Nut Tightening
2013.4.15 9:5:51 AM
Advertisement
Table of Contents
