Denon AVR-S900W Owner's Manual page 157

Contents Connections
o Pass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CD
z
(Default : CBL/SAT):
z"Pass Through Source" can be set when any of the HDMI
connectors is assigned to "CD" for the input source in the "Input
Assign" setting. (v p. 164)
"Pass Through Source" can be set when "HDMI Control" is set to "On" or "HDMI
Pass Through" is set to "On".
Front panel Display
Playback
The most recently used input source will
go into standby mode.
Pass through the selected input source.
Rear panel
Settings
o TV Audio Switching
Sets automatic switching to the "TV Audio" input when a TV connected
via HDMI sends an appropriate CEC control command to the AVR.
On
(Default):
Off:
o Power Off Control
Links the power standby of this unit to external devices.
All
(Default):
Video:
Off:
157 Remote
Tips Appendix
Select the TV Audio input automatically
when receiving a command from the TV.
Do not select the TV Audio input
automatically when receiving a command
from the TV.
If power to a connected TV is turned off
independently of the input source, power
to this unit is automatically set to standby.
With an input source being selected that
is assigned either "HDMI", "COMP" or
"VIDEO", when you turn the power of the
TV off, power to this unit is automatically
set to standby. (v p. 165)
This unit does not link with power to a TV.
Index