Denon AVR-S900W Owner's Manual page 117

Contents Connections
DTS sound mode
Sound mode type
DTS Neo:6 This mode can be selected when the DTS Neo:6 decoder is used to play back 2-channel sources in 6.1/7.1-channel
surround sound including the surround back channel(s).
There are two playback modes: "Cinema" mode that is optimized for movie playback, "Music" mode that is optimized for
music playback.
DTS Surround This mode can be selected when playing sources recorded in DTS.
This mode is suitable for playing discs recorded in DTS-ES.
DTS ES Dscrt6.1
z
The surround back channel added using the discrete method is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
This mode is suitable for playing discs recorded in DTS-ES.
DTS ES Mtrx6.1
z
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit's matrix decoder and played from each channel (surround left, surround right,
surround back).
DTS 96/24 This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD This mode can be selected when playing sources recorded in DTS-HD.
DTS Express This mode can be selected when playing sources recorded in DTS Express.
z This can be selected when "Speaker Config." - "Surr. Back" (v p. 180) is not set to "None".
PCM multi-channel sound mode
Sound mode type
Multi Ch In This mode can be selected when playing multi-channel PCM/DSD sources.
Front panel Display
Playback Settings
Rear panel 117
Tips
Description
Description
Remote Index
Appendix