HP EliteBook 8770w Maintenance And Service Manual page 54

8. Lift the Smart Card reader to the upright position (2).
9. Loosen the Phillips M2.5x10.5 captive screws (1) that secure the hard drive to the computer.
10. Grasp the tab on the hard drive and slide the hard drive (2) to disconnect it from the system
board.
11. Lift the left side of the hard drive and remove the hard drive at an angle from the hard drive bay
(3).
12. If it is necessary to remove the hard drive bracket, follow these steps:
a. Remove the four Phillips M3.0x3.0 screws (1) that secure the hard drive bracket to the hard
drive.
46 Chapter 4 Removal and replacement procedures