Toshiba SD-P2600 Service Manual page 9

3. Disassembling and Reassembling Procedure
3.1 Disassembling and reassembling Procedure Chart
This section explains how to disassemble
SD-P2600, replace parts and reassemble. It
may not be necessary to remove all the parts
in order to replace one. The chart below is a
guide to which parts need to be removed in
order to remove others.
You can see how to disassemble and
reassemble by clicking the icon on the chart.
Before disassembling, take proper measures
against electric static.
The following movies show the procedure for
assembling/disassembling of SD-P2500 as
the procedure for SD-P2600.
2.Cover
(*change2)
3.LCD Assembly
3.2 Changes in the SD-P2600
(1) SD Card/Multimedia Card slot & Disk cover indication (change1)
SD Card/Multimedia Card can be available in SD-P2600 instead of SD Card/Smart Media in
SD-P2500.
Indication on the disk cover
is changed.
SD Card/Multimedia Card slot
1.Base Assembly
(*change1)
Disassembling
Reassembling
Disassembling
Reassembling
It is because there are only few differences on
disassembling/reassembling procedure and its
appearance between SD-P2500 and SD-P2600.
When the movie includes the changes in SD-
P2600, "*change" mark is added in the title box.
For the details on the changes, refer to the "3.2
Changes in SD-P2600".
Start with removing the battery or disconnecting
the AC adapter.
Please install Apple Quick Time 4 or more for
seeing the movies.
When you stop the movie halfway, press Esc
key.
Disassembling
Reassembling
4.System Board/
DVD Drive
(*change3)
Disassembling
Reassembling