Toshiba SD-P2600 Service Manual page 11

4. Inspection after Disassembling and Reassembling
Note: Be careful not to make any scratches and dirt while you are working.
1. Check the power-on function
Press the power switch and make sure that the power is turned on.
2. Check the switches
Press each switch and make sure the switch is functioning properly as described in User's Manual.
Check all of the switches. Make sure the switch unit and main board are connected properly. The
switch unit might be broken if the cable is inserted with slant or insertion/withdrawal of the cable is
repeated.
3. Check the DVD replay (for single-layer disk)
Replay a DVD disk (single-layer disk) and check the output of sound and headphone. If pick short of
the DVD drive is not removed, the DVD disk might not be replayed.
4. Check the DVD replay (for dual-layer disk)
Replay a DVD disk (dual-layer disk) and check the operation. If the DVD drive or the main board is not
adjusted after replacing, the DVD disk might not be replayed.
5. Check the sound of CD-RW
Play a CD-RW or CD-R and check the sound. If pick short of the DVD drive is not removed, the CD-
RW or CD-R might not be played.
6. Checking the power-off function
Turn off the SD-P2600.
7. Appearance check
If you find any dirt or stain, wipe them with soft cloth.