Changing The Volume - Sennheiser MB Pro1 Instruction Manual

Using the headset
Vol +
Vol –
16 | MB Pro1 | MB Pro 2

Changing the volume

CAUTION
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to permanent hearing
defects.
Set the volume to a low level before putting on the headset.
X
Do not continuously expose yourself to high volumes.
X
You can adjust three independent volume settings for the headset:
• speaker volume: can be adjusted during an active call,
• audio volume: can be adjusted during music reproduction,
• volume for the ring tone, the beeps and the voice prompts: can be adjusted in
idle mode (no active call or music reproduction)
To adjust the volume, move the Audio button as shown in the diagram.
X
When the minimum or maximum volume is reached, the voice prompt "Volume
min" or "Volume max" is announced in the headset. When the voice prompts
are disabled, you hear a beep in the headset instead.
+
Changing the direction of the Audio button's volume up/down function
You can change the direction of the Audio button's volume up/down function if,
for example, you want to wear the headset on the other ear (see page 13).
Press and hold the multi-function button (no active call or music reproduction):
X
The direction of the Audio button's volume up/down function is changed. The
voice prompt "Swap volume keys" is announced in the headset. MB Pro 2: When
the direction of the Audio button's volume up/down function is changed, the
headset's left and right stereo channel is also changed to provide optimum
stereo sound.
OR
–
2 s
"Swap volume keys"
+
–
A
B