5.4 TDA6107AJF
The TDA6107AJF includes three video output amplifiers and is intended to drive the three
cathodes of a colour CRT directly. The device is contained in a plastic DIL-bent-SIL 9-pin
medium power(DBS9MPF) package, and uses high-voltage DMOS technology.
To obtain maximum performance, the amplifier should be used with black-current control.
5.4.1 Features
§ Typical bandwidth of 5.5 MHz for an output signal of 60 Vpp
§ High slew rate of 900V/ s
§ No external components required
§ Very simple application
§ Single supply voltage of 200V
§ Internal reference voltage of 2.5 V
§ Fixed gain of 81.
§ Black-current stabilisation (BCS) circuit with voltage window from 1.8 to 6 V and current
window form 100uA to -10mA
§ Thermal protection
§ Internal protection against positive flashover discharges appearing on the CRT
5.4.2 Pin description
Pin
Symbol
Description
1
V
inverting input 1
i(1)
2
V
inverting input 2
i(2)
3
V
inverting input 3
i(3)
4
GND
ground (fin)
5
I
black current measurement output
om
6
V
supply voltage
DD
7
V
cathode output 3
OC(3)
8
V
cathode output 2
OC(2)
9
V
cathode output 1
OC(1)
28
CP-093F Service Manual