Use Scenea; Universal Access - Philips LCD TV User Manual

[Play once] Plays the file once.
•
• [Shuffle on] / [Shuffle off]: Enables or
disables random play of songs.
Watch video
Press the Navigation buttons to select a
video file, then press OK.
• Press or to rewind or fast forward
a file.
•
Press to exit the content browser.
During video playback, press
the following settings:
• [Stop]: Stops playback.
• [Repeat]: Repeats a video.
• [Shuffle on] / [Shuffle off]: Enables or
disables random play of videos.
Listen to digital radio
NonPu blish
If digital broadcasting is available, digital radio
channels are installed automatically during
installation.
1. While watching TV, press
2. Select [Channel list:], then press OK.
3. In the channel list, press
4. Select [Select list] > [Radio], then press
OK.
5. Select a radio channel, then press OK.

Use Scenea

Activate Scenea
NonPu blish
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to [Home] mode.
1. Press .
2. Select [Scenea] , then press OK.
The default or pre-loaded picture is
displayed.
Note: If the sleeptimer is off, the wallpaper is
displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleeptimer.
For more information on the sleeptimer, see
Use more of your TV > Use timers and
locks > Sleeptimer (Page 19).
Set a picture as Scenea
NonPu blish
Note: The file size of the picture must not
be more than 1MB.
EN 22
to access
.
.
1. Connect the USB storage device to the
TV.
2. Press .
3. Select [Browse USB], then press OK.
4. Select a picture, then press
5. Select [Set as Scenea], then press OK.
6. Select [Yes], then press OK.
7. Press any key to exit Scenea.

Universal access

Enable universal access
NonPu blish
Where supported by your digital TV
broadcaster, this TV allows special audio and
subtitles for the hearing impaired, as well as
special audio for the visually impaired.
To enable these features, you must turn on
universal access in the [Preferences] menu.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Universal access] > [On],
then press OK.
Hearing impaired
NonPu blish
Some digital TV channels broadcast special
audio and subtitles adapted for people who
are hearing impaired.
To switch on hearing impaired audio and
subtitles (if available)
1. While watching TV, press
2. Press the red button to select [Hearing
impaired].
3. Press the green button to switch on
hearing impaired audio and subtitles, press
the red button to switch it off.
4. Press to exit.
Tip: To verify whether a hearing impaired
audio language is available, press
select [Audio language]. Languages with an
ear icon indicate hearing impaired support.
.
.
and