Use Subtitles; Access Multimedia - Philips LCD TV User Manual

Set or change the child lock code
1. Press .
2. Select [Setup] > [Channel settings] >
[Child lock].
3. Select [Set code] or [Change code].
4. Enter the code with the Numeric
buttons.
Tip: If you forget your code, enter '8888' to
override any existing codes.
NonPu blish
Lock or unlock channels
1. In the child lock menu, select [Channel
lock].
2. Enter the child lock code with the
Numeric buttons. The [Channel lock]
menu appears.
3. Select channels to lock or unlock.
Parental rating
Some digital broadcasters rate their
programs according to age. You can set your
TV to display only programs with age ratings
higher than your child's age.
1. Press .
2. Select [Setup] > [Channel settings] >
[Child lock] > [Parental rating]. A message
appears prompting you to enter the child
lock code.
3. Enter the child lock code with the
Numeric buttons.
4. Select an age rating, then press OK. All
programs beyond the selected age rating are
blocked.
For information on child lock codes, see Use
more of your TV > Use timers and locks >
Child lock (Page 19).

Use subtitles

On analog channels
NonPu blish
1. Switch the TV to an analog TV channel.
2. Press , then select [Text] and press
OK.
3. Enter the three number page number of
the subtitles page (usually '888').
4. Press to exit teletext. Subtitles display if
available.
EN 20
On digital channels
1. While watching TV, press
2. Select [Subtitles], then press OK.
3. In the menu that appears, select [Off],
[On] or [On during mute], then press OK.
Note: With [On during mute], the TV
displays subtitles only when the sound is
muted with .

Access multimedia

Browse USB
NonPu blish
You can view photos or play music and
videos on TV from a USB storage device.
Caution: Philips is not responsible if the USB
storage device is not supported nor is it
responsible for damage or loss of data from
the device.
You can access the USB content browser
using one of the following methods:
•
When watching TV, connect the USB
device to the USB port on the side of
your TV.
• 1. Press .
2. Select [Browse USB], then press
OK.
View slideshow
Press the Navigation buttons to select a
picture, then press OK.
• To pause or stop playback, press OK
again.
• To jump to the previous or next file,
press or .
•
Press to exit content browser.
Press to access or exit the following
settings:
• [Show info]: Displays the file
information.
[Stop]: Stops slideshow.
•
[Rotate]: Rotates the file.
•
[Repeat]: Repeats the slideshow.
•
• [Play once]: Plays the file once.
• [Shuffle off] / [Shuffle on]: Enables or
disables random display of pictures in
the slideshow.
.