Installing And Verifying; The Yst-M45D Speaker; Device Drivers - Yamaha YST-M40 Service Manual

I INSTALLING AND VERIFYING

THE YST-M45D SPEAKER

DEVICE DRIVERS

Please follow these steps to install the Yamaha YST-
M45D speaker device drivers in your Windows 98 system
using the included CD-ROM, and verify that Windows 98
recognizes the installed device drivers and that audio CD,
sound generated while using software, and system
sounds from the computer will be output via the USB port.
Installing the device drivers
Notes:
• Do not connect the PC using the USB cable
before installing the YST-M45D device drivers. If
you accidentally connect them, refer to "Re-
installing the Device Driver" on page 3.
• Before starting, check the "System Requirements"
section to see if your PC supports YST-M45D.
• Make sure that no other CD-ROM is loaded in the
CD-ROM drive and that you quit all application
programs.
• Have your Windows 98 CD-ROM ready when you
install the Yamaha YST-M45D speaker device
drivers. You may need it in some cases.
• The installation procedure may differ from the
following instructions depending on the system
environment. Follow the instructions that appear in
the dialog box. Please contact your computer's
manufacturer or dealer if you have any questions.
1. Connect the YST-M45D speakers as shown in the
diagram on page 2 of Owner's Manual and connect the
AC adaptor to the AC receptacle. At this time, do not
connect the YST-M45D to the computer using the USB
cable.
2. Turn on your PC and, if it's not running already, start
Windows 98.
3. Insert the YAMAHA YST-M45D CD-ROM into the CD-
ROM or DVD-ROM drive.
If the Windows 98 Autorun feature is turned on, the
installation start up screen appears automatically.
4. Continue with the installation as prompted.
If the Windows 98 Autorun feature is not turned on, you
must start the installation manually, as explained
below.
5. Double-click the My Computer icon.
The My Computer window opens.
6. Double-click the CD-ROM icon.
The installation start up screen appears.
7. Continue with the installation as prompted.
8. After the installation is completed, connect the YST-
M45D to the computer using the USB cable.
Verifying the installation of device drivers
After you have installed the device drivers as explained in
the previous section, follow the steps below to verify that
Windows 98 recognizes these drivers.
1. Select "Start," then select "Settings-->Control Panel"
from the menu.
2. Double-click "System" in the control Panel to display
the "System Properties" panel, select the "Device
Manager" tab, then select "View devices by type."
3. Click the plus sign (+) for "Human Interface Devices,"
"Sound, video and game controllers," and "Universal
Serial Bus Controller" in the device list, and check to
see if "Human Interface Devices," "YAMAHA YST-
M45D USB Audio," and "YAMAHA YST-M45D USB
Composite Device" are listed respectively.
Select "View devices by type".
"Human Interface Devices" is listed.
Select "View devices by type".
"YAMAHA YST-M45D USB Composite Device" is listed.
"YAMAHA YST-M45D USB Audio" is listed.
• The contents of the list on the display shown above
may vary depending on the system environment.
Note: If the letter an exclamation point (!), or a question
mark (?) appears to the left of the USB device name,
check the following:
• Make sure that you have installed the drivers from the
included CD-ROM.
• Check to see if the USB cable is connected securely.
• The AC adaptor plug is connected to the AC receptacle.
If these actions do not resolve the situation, refer to your
Windows documentation or ask your computer dealer to
enable the USB port.
YST-M40/M45D
2