Optoma DV11 Serveice Manual page 58

3. Key in the serial number into the barcode
blan�� s�a�e and �li��� "�ro�ram" button
4. Change the cable to VGA1
- Message box appears on the screen,
t��en �li��� "�K."
5. When the EDID program for VGA1 is
�om�leted��� a messa�e "�K" �ill a��ear on
the screen.
6. Read EDID information
� I n t��e "read item��� " sele�t "analo�" and
"trans"
� Press "read" to ���e��� t��e serial number
Note: If EDID upgrade failed, push the reset
button on the EDID board and re-proceed
step 3 to step 5 in section 6-4.
3
DV11 / DVD100 / U2 / U3 Confidential
6
6
4
6-4