Function Test & Alignment Procedure; Test Equipment Needed; Service Mode; Osd Reset - Optoma DV11 Serveice Manual

Chapter 4
Function Test & Alignment Procedure

4-1 Test Equipment Needed

� IB� PC �it�� XGA resolution
� D�D �layer �it�� �ulti�system (N�SC�PA��S�CA�)��� e�ui��ed �Com�onent"��� �S��ideo"���
�Com�osite" and "�D�I."
- HDTV Source (480P, 720P, 1080i)
- Minolta CL-100
- Quantum Data 802B or CHROMA2327 (Color Video Signal & Pattern Generator)
- After changing parts, check the information below.

4-2 Service Mode

1. Turn on the projector and input the signal
2. Do the following actions sequentially to get into service mode
(1) Press power > left > left > up simultaneously.
(2) Ser�i�e mode �ill be s��o�n a�ter �ressin� "�enu" and "�nter" �or 3 se�onds.
(3) A�ter �onfirmin� t��e �onfi�uration��� �ress "�enu" and exit.

4-3 OSD Reset

1. A �ter final QC ste���� �e ��a�e to erase all sa�ed ���an�e a�ain and resotre t��e �SD
default setting. The following actions will allow you to erase all end-users' settings and
restore the default setting:
(1) Please get into OSD menu.
(2) �o exe�ute "�eset" �un�tion.
DV11 / DVD100 / U2 / U3 Confidential
4-1