Changing Shooting Function Settings - Canon PowerShot A800 User Manual

Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 45). This
also works when [Auto Power Down] is set to [Off].

Changing Shooting Function Settings

After pressing the
the settings in the 4 tab (p. 41).
Before attempting to shoot using a function explained in this section in
modes other than G, check if the function is available in those modes
(pp. 130 – 135).
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
Changing Shooting Function Settings
z
Choose [Power Saving], then press the m
button.
z
Press the op buttons to choose [Display
Off], then use the qr buttons to choose a
time.
z
In order to save battery power, you should
choose less than [1 min.].
button, press the qr buttons to choose G, then change
z
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
113