Panasonic PT-CW330 Brochure & Specs page 3

Supporting Various 3D Systems
HDMI Input Terminal Supports 3D
The HDMI input terminal supports 3D. Connect a 3D Blu-ray player to the
projector to project Blu-ray 3D images.
DLP™ Link™
As synchronized signals are contained between the frames (images) for the left
and right eyes, you can build a 3D system without the need for the optional emitter.
Confi guration: 3D Contents + Reproduction apparatus + 3D Glasses
™
The DLP System Maintains Long-lasting, Stable Performance.
™
In the DLP system, the image quality does not degrade with time due to long life of the device. You can use the projector for various systems over a long period without
5
worry of quality loss. *
Superb Performance
10 W High-output Speaker Meet Your
Meeting/Seminar Room Needs.
The volume level of the 10 W high-output speaker is enough for meeting
rooms and classrooms; you do not need to use an external speaker. You can
make multi-media presentations.
Ensuring a Long Lamp Replacement Cycle
The lamp replacement cycle for the PT-CW330/CX300 is 4,000 hours*
for the PT-CW240 is 5,000 hours* 6 . Such long replacement cycles reduce the
hassle and the cost of maintenance, while minimizing environmental impact.
0.5 W* 7 Standby Power Consumption
The standby power consumptions is as low as 0.5 W *
and effects on the environment.
Extensive Interfaces with an HDMI Input Terminal
Extensive interfaces, including two sets of computer (RGB) input terminals,
one set of computer (RGB) output terminals and an HDMI input terminal,
allows a wide range of system confi gurations.
Audio Can Be Output in Standby Mode
Audio can be output from the audio output terminal in Standby mode*
function is useful when the audio output terminal is connected to the external
audio system * 9 via the projector.
"Crestron RoomView™" Compatible
The wired LAN terminal supports Crestron's application software, "Crestron
™
RoomView ", which can control various system devices by using a personal
computer connected to the network.
3D-compatible Signal
Supports Frame Packing, Side-by-Side, Top-and-Bottom, and
Frame Sequential method.
* 4
(DLP™ Link™ system)
Convenient Functions
"Wall Color Setting" Convenient for a Classroom
with no Screen
The PT-CW330/CW240/CX300 has an image mode performing optimal
correction when projecting onto a blackboard and wall.
Easy to Replace the Lamp
Replace the lamp from the side of the projector. When
replacing the lamp, there is no need to detach the projector
6 ; and
from the ceiling bracket or the wall mount bracket.
"Security Bar" Useful for Protection
7 , reducing running cost The PT-CW330/CW240/CX300 is equipped with the
"security bar" for preventing theft.
Wireless Remote Control is Convenient
When Using More Than One Projector.
A maximum of seven IDs (ALL, ID1-ID6) can be set up,
allowing individual remote control of each projector.
8 . This
*1 Available for PT-CW330/CW240.
*2 PT-CW240 has brightness of 2,600 lm.
*3 During RGB signal input, Lamp power:Normal.
*4 To view 3D images, DLP™ Link™ active-shutter 3D glasses are separately required. (In the
*5 Twenty-four-hour continuous operation is not available.
*6 This is the maximum value when the lamp power is set to Eco mode where the lamp is turned
*7 When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off].
*8 Select the Menu for setting.
*9 In addition to the speaker, an audio amplifi er is necessary.
[Viewing 3D images]
View 3D images at a distance at least three times further than the height of the screen.
Each person views and feels the 3D images differently. In some cases, the effects may
cause viewers to feel sick. If you see double 3D images or do not see stereoscopic
images, you may feel fatigue or discomfort If you feel sick, immediately stop viewing
3D images. Children younger than fi ve or six years old should not view 3D images.
against Theft
Eco-friendly
• No halogenated fl ame retardants are used in the cabinet.
• Lead-free glass is used for the lens.
• Coating-free cabinet for easy recycling.
• Low standby power of 0.5 W* 7
• Switchable lamp mode
active shutter system, the right/left liquid crystal shutter is opened and closed alternately
according to projected images.)(The active-shutter 3D glasses with refresh rate of 96 – 144 Hz are
recommended.3D images of 60 Hz can also be viewed by a 120 Hz compatible device.)
on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long
time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle
is 3,000 hours.The usage environment affects the duration of the lamp.