Hawking HMPS1U User Manual page 51

Factory Default.
Enable Raw TCP Printing: select or clear Enable Raw TCP Printing support. It is
enabled in Factory Default and users may set the protocol's TCP ports as
following boxes:
- TCP Port 1: set TCP port for the printer of USB1 port (default: 9100)
- TCP Port 2: set TCP port for the printer of USB2 port (default: 9101)
Enable SMB/CIFS Print/File Server: select or clear Enable SMB/CIFS Print/File
Server support. It is enabled in Factory Default.
- Enable Internet Access: select or clear Enable Internet Access support. If you
clear the item, you do not allow users access to your SMB/CIFS server via
Internet. If you select the item, you allow Internet users to access your storage
using the SMB/CIFS protocol.
-
Enable Server Authentication: select or clear Enable Server Authentication
support. Select the item if you want to share your storage or printer with user
level security which requires a user name and password to login. If you clear
the item, your storage will be shared without security.
Enable FTP Server: select or clear Enable FTP Server support. It is enabled in
Factory Default and users may set some parameters as follows:
- FTP Port: Enter an integer number to set FTP server's TCP port (default: 21)
- Set Maximum Session Number: select or clear Set Maximum Session
Number support. You can limit the FTP session number by selecting the
support and enter an integer to set the allowable maximum session number. If
you clear this field it means that FTP server will have no limitation in session
number.
- Set Passive Mode: select or clear Set Passive Mode support so that FTP
server can accept passive mode.
- Enable Server Authentication: select or clear Enable Server Authentication
support. If you select the support, you need to enter user name and password
to login to the Server. If you clear the support, you do not need a user name
and password to enter the Server.
- Allow Anonymous Login:
"anonymous" login to your FTP server with Read-Only permission and the FTP
server will not check the password. If you clear the item, your FTP server will
not support anonymous login function.
Enable UPnP (Universal Plug and Play): select or clear Enable UPnP support. It
is enabled in Factory Default.
select the item if you want to allow the user
51