Honeywell CT2800 Installation And Programming Instructions page 13

Step 1. Set Current Time and Day
Clock/Day
a. Press once.
The time is displayed (Fig. 17).
b. Press Time
Clock/Day
c. Press again.
The day is displayed (Fig. 18).
d. Press Time
Run
Program
e. Press once.
The current time and day and the current temperature are
displayed (Fig. 19).
Step 2. Learn About Programming Features
Your CT2800 Thermostat allows you to program schedules for both a heating season and a cooling season.
• During the heating season, you will want to set the normal room temperature higher and the energy-saving
temperature lower.
• The reverse is true during the cooling season—the normal room temperature will be lower and the energy-saving
temperature higher.
For each season, you can set up to four program periods for the weekdays (Monday–Friday), and up to two program
periods for the weekends (Saturday and Sunday). The program periods are defined in the following table.
until the current time is displayed.
until the current day is displayed.
Fig. 17.
Fig. 18.
Fig. 19.
13 69-1638—1