Checking The Program Times And Temperatures; Checking The Current Temperature Setting - Honeywell CHRONOTHERM T8621A User Manual

CHECKING THE PROGRAM
TIMES AND TEMPERATURES
If desired, check all the stored set-
tings without affecting the perma-
nent program.
CHECKING THE CURRENT
TEMPERATURE SETTING
Press a single key to compare actual
room temperature to the setting at any
time.
Press and hold until the desired period
shows on the display. The start time
PERIOD
and temperature setting will appear on
the display.
Press and release to display the next day
time and temperature for that period.
DAY
Press and release to return to normal
RUN
operation.
PROGRAM
Press and release. The display will show
PRESENT
the current temperature setting for sev-
SETTING
eral seconds, then revert to the room
temperature.
During recovery from energy savings,
the setting displayed will not match the
programmed setting. This is because
the thermostat gradually changes the
temperature setting during recovery to
provide maximum comfort combined
with most efficient use of the heating or
cooling equipment.
27
T8621A,C,D
OPERATING THE THERMOSTAT
PM
MON TUE WED THU FRI HEAT
NIGHT
PM
SAT ON HEAT
NIGHT
SLEEP
PM
MON TUE WED THU FRI
EVENING
HEAT
68-0058—1
SET
PT
SET
PT
SET
PT