Before Starting Electrical Adjustments; Twain Driver Installation; Installing The Adjustment Software - Canon PowerShot A30 Service Manual

3.3 Before Starting Electrical Adjustments

3.3.1

TWAIN Driver Installation

Install the USB Driver for Adjustment in the CD-ROM to PC.
("This Adjustment Software" is impossible when the RS-232C TWAIN driver is used.)
3.3.2

Installing the Adjustment Software

1. Double click the icon on the launcher screen or a file in the CD-ROM. (Model name of the camera
that you are going to adjust and the name of the adjustment software are different.)
A40
Camera Type
Third place
Destination
of Serial No.
USA/Europe/Canada
OTH (Asia/Oceania)
A30
Camera Type
Third place
Destination
of Serial No.
USA/Europe/Canada
OTH (Asia/Oceania)
2. When the dialog box below appears, click the "OK" button.
Icon
2/3/5 A40_USA_Adj.
4 A40_OTH_Adj.
Icon
2/3/5 A30_USA_Adj.
4 A30_OTH_Adj.
3-19
CHAPTER 3. REPAIR INSTRUCTION
Adjustment Software
File Path
\Adjust\A40\USA\Setup.exe
\Adjust\A40\OTH\Setup.exe
Adjustment Software
File Path
\Adjust\A30\USA\Setup.exe
\Adjust\A30\OTH\Setup.exe
* All figures for the
Adjustment Software
are examples of the
PowerShot A40.