CHAPTER 3. REPAIR INSTRUCTION
How to fold the OPT FPC
CCD UNIT FPC
2.6 MAIN PCB ASS'Y
(1) MAIN PCB ASS'Y
1. Remove the EMC SHEET 2.
2. Remove the screws.
3. Remove the OPT FPC.
4. Remove the M-R FPC.
5. Remove the M-D FPC.
6. Remove the flexible printed wired board of the CCD UNIT.
7. Remove the two screws.
8. While taking care of the claws in the top and bottom, remove the MAIN PCB ASS'Y
in the direction of arrow.
9. Remove the M-S FPC.
10. Disconnect the connector.
(1)-1
EMC SHEET 2
(1)-2
d
OPT FPC
M-S FPC
(1)-9
(1)-10
(1)-6
(1)-5
M-D FPC
Fig. 3-8 MAIN PCB ASS'Y
3-8
(1)-4
M-R FPC
(1)-3
Claws
(1)-8
(1)-7
c
MAIN PCB ASS'Y