Logitech Squeezebox Duet Quick Start Manual page 7

Connect the controller and set up the receiver
1. Remove the controller
from the charging
station.
2. Follow the on-screen
instructions displayed on
the controller's LCD.
These instructions tell
you how to connect the
controller to your
computer network,
using the network name
(SSID) and security key
you recorded in step 2.
3. Once the controller is
connected to your
network, it will
automatically look for the receiver so you can set the
receiver up. You should see the screen shown here.
The number on the controller's LCD screen is the MAC
address (unique network address) of your receiver. You
may confirm this by looking at the label on the bottom of
the receiver where the MAC address is printed.
set
Up Squeezebox
>
00042016013C
1. Press the Center button on the controller. After a few
moments, the LED on the receiver should change
colors. (These colors indicate different steps in the
configuration and connection process. A complete list
of the colors can be found in the Squeezebox Duet
User Guide.)
2. On the controller's LCD, your are asked to select a
music source. Unless you have multiple instances of
SqueezeCenter running on your network, you should
see just one local music source listed, along with
SqueezeNetwork.
3. Scroll to your listed music source using the controller's
Scroll Wheel, and press the Center button to select your
music source. The LED on the receiver should change
to white.
Tip: If you do not see a local music source and your are
sure SqueezeCenter is installed and running, you may
have a firewall that is blocking access. For assistance,
refer to the Troubleshooting section in the
Squeezebox Duet User Guide or go on-line at
www.logitech.comfsupport.C1ick the
Troubleshooting button, select the wireless music
systems, and follow the on-screen instructions.