Data Verification; Video - Toshiba A100 User Manual

■
If you add data to a DVD-R/-R DL and DVD+R/+R DL disc that you
have already recorded to, you might not be able to read the added data
under some circumstances. It cannot be read in 16-bit operating
systems, such as Win-dows 98 SE and Windows ME. In Windows NT 4,
you will need Service Pack 6 or later to read added data. In Windows
2000, you will need Service Pack 2 or later to read it. Some DVD-ROM
and CD-RW/DVD-ROM drives cannot read added data regardless of
the operating system.
■
TOSHIBA Disc Creator does not support recording to DVD-RAM discs.
To record to a DVD-RAM, use Explorer or other utility.
■
When you back up a DVD disc, be sure the source drive supports
recording to DVD-R/-R DL/-RW or DVD+R/+R DL/+RW discs. If the
source drive does not support recording to DVD-R/-RW or DVD+R/
+RW discs, it might not be backed up correctly.
■
When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to
use the same type of disc.
■
You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.
■
Only DVD Super Multi (+-R DL) Drive
When TOSHIBA Disc Creator launched, it is possible that the disc tray
of the DVD drive with the disc loaded is unable to be ejected even the
"Eject" button is pressed. To solve this problem, please click on the
"eject" button ( ) on the TOSHIBA Disc Creator main screen, or right
click on the icon of the DVD drive where the disc loaded, select "Eject"
of the pop-up menu under "My Computer" or "Explore".

Data Verification

To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Click the Options button (
open the Options panels.
2. Select the Data in the left-side menu.
3. Mark the Verify data written to the disc after burning check box in the
Data Options.
4. Click the OK button.

Video

You can record video using Ulead DVD MovieFactory
User's Manual
) on the TOSHIBA Disc Creator Assist to
Operating Basics
®
for TOSHIBA.
4-14