Connecting The Ac Adaptor; Opening The Display - Toshiba A100 User Manual

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.
The AC adaptor can be connected to any power source supplying from 100
to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to
charge the battery pack, refer to Chapter 6,
Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The output rating for the
computer is 15 volts DC.
1. Connect the power cord to the AC adaptor.
2. Connect the AC adaptor's DC output plug to the DC IN port on the back
side of the computer.
3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicator on the front of the computer should glow.

Opening the display

The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer to the right to unlatch
the display panel.
2. Lift the panel up and adjust it to the best viewing angle for you.
User's Manual
Connecting the power cord to the AC adaptor
Connecting the adaptor to the computer
Power and Power-Up
DC-IN
Getting Started
Modes.
3-2