Design Specifications; Operational - Honeywell IS4910 Integration Manual

For integration into customer oem devices
Table of Contents

Advertisement

Design Specifications

Operational

Light Source: Four, 650 nm Red Light Emitting Diode LED
Depth of Field*:
Field of View:
Scan Area:
Rotation Sensitivity: 360° Around the Optical Axis
Minimum Element Width:
Resolution: 1.2 mega pixels (1280 x 960)
Symbologies Supported: Software Dependent*
Print Contrast: 20% Minimum
* Depth of field information is for reference only. Depth of field distances were measured with decoding
software from Omniplaner, a division of Honeywell Scanning and Mobility. Actual values may vary
depending on environmental conditions, host hardware, and decoding software.
** Contact a customer service representative at 1-800-436-3876 for information on available decoding
software.
22
25 mm – 310 mm (1.0" to 12.2") for 0.330 mm (13 mil) 1D Bar Codes
IS4910
See page 20 for additional information on engine depth of field.
50 mm – 170 mm (2.0" to 6.7") for 0.330 mm (13 mil) 1D Bar Codes
IS4911
See page 21 for additional information on engine depth of field.
50° Horizontal
IS4910
37.5° Vertical
38° Horizontal
IS4911
28.5° Vertical
118.4 mm x 86.2 mm (4.7" x 3.4")
at 127 mm (5.0") from the Face of the Engine
IS4910
236.8 mm x 172.4 mm (9.3" x 6.8")
at 254 mm (10.0") from Face of the Engine
37 mm x 28 mm (1.45" x 1.08")
at 80 mm (3.15") from the Face of the Engine
IS4911
78 mm x 58 mm (3.09" x 2.3")
at 170 mm (6.69") from the Face of the Engine
.10 mm (4.0 mil) 1D, PDF
IS4910
.254 mm (10 mil) 2D
.063 mm (2.5 mil) 1D, PDF
IS4911
.10 mm (4.0 mil) 2D

Advertisement

Table of Contents
loading

This manual is also suitable for:

Is4911

Table of Contents